融合神经网络与超像素的候选区域优化算法

为解决目标检测中候选区域召回率低的问题,提出融合神经网络与超像素的目标候选区域算法。该算法利用神经网络提取更能清楚表达目标边界的特征,并使用聚类、相似性等策略,计算每个滑动窗口所含有的边缘信息量;将待测图像使用简单线性迭代聚类算法分割成若干个超像素,并利用超像素的空间位置、完整性、相邻超像素间的对比度信息,计算各个超像素的显著性得分及每个滑动窗口的显著性得分;根据每个滑动窗口的边缘信息及显著性得分筛选滑动窗口。在PASCAL VOC 2007测试集上进行对比实验,其实验结果表明:所述算法能够快速产生定位质量高的候选区域。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

基于GDOP的多基地雷达布站优化研究

以BLUE算法和GDOP为基本定位算法和精度分析工具,评估多基地雷达的定位性能,建立以GDOP最小值最小和有效监控区最大为目标的多基地雷达布站优化模型.仿真结果表明,通过以下措施可提高定位性能:①增加收发站总数;②采取扇形方式布站;③优先增加部署接收站;④交替部署收发站;⑤通过优化模型优化扇形布站分布角总和.     

山水自在 筑鉴非凡——重庆商务职业学院新校区规划设计

介绍了重庆商务职业学院新校区的校园规划策略。基于生态保护进行校园规划,通过建筑布局与地形环境的协调共生形成山水校园,结合历史人文营造个性化校园空间。同时,从生态保护、规划分区、建筑布局、景观空间等方面探讨文化内涵与个性校园的规划设计策略,得出自然山水形成了丰富的地域景观,并由此创造出具有个性的地区文化的结论。旨在为山地校园建设起到借鉴作用。     

Experiment and simulation of launching process of a small-diameter steel cartridge case

In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber pressures. The pressure curves of cartridge chamber are measured in experiment, and the tensile test data of cartridge are loaded into the numerical calculation to compare with the experimental data. The conclusion was obtained that the calculated results match better with the experimental results by considering strain rate bilinear kinematic hardening material constitutive model. The forces on the various parts of the cartridge during launching and their deformation rules are achieved, in which the equivalent plastic strain decreases and the cylinder ring withstands the maximum equivalent stress when the cartridge case clings to the bore from the mouth to the bottom.     

On the continued acceleration of bomb casing fragments following casing fracture

It has been said that, once a bomb casing has fractured, “detonation gases will then stream around the fragments or bypass them, and the acceleration process stops there.” However, while apparently copious gas flow through casing fractures indicates some pressure release, it is also an indication of significant gas drive pressure, post casing fracture. This paper shows two approaches to the problem of calculating the actual loss of drive. One presents first-order analytical calculations, in cylindrical geometry, of pressure loss to the inside surface of a fractured casing. The second shows the modelling of a selected example in the CTH code. Both approaches reveal that gas escape, while occurring at its own sound-speed relative to the adjacent casing fragments, has to compete with rapid radial expansion of the casing. Together with some historic experiments now publicly available, our calculations indicate that post-fracture casing fragment acceleration is, for most systems, unlikely to be reduced significantly.     

Biased retro-proportional navigation law for interception of high-speed targets with angular constraint

A new guidance law, called biased retro proportional navigation (BRPN), is proposed. The guidance law is designed to intercept high-speed targets with angular constraint, which can be used for ballistic target interception. BRPN guidance law is defined, and the exact time-varying bias for a required impact angle is derived. Furthermore, the simulation results (trajectory, variation of navigation ratio, capture region, etc) are compared with those of biased proportional navigation (BPN), proportional navigation and retro-proportional navigation. The results show that, at the cost of a higher intercept time, BRPN demands lower terminal lateral acceleration and has larger capture region compared to BPN.     

偏远严寒地区营房节能方案及经济分析

采取对比方式,利用DOE-2程序对偏远严寒地区两栋节能营房和普通营房在实测的基础上进行能耗模拟。对营房能耗水平及影响营房能耗的因素作了定量、定性的分析计算,研究在不同围护结构及换气次数下的采暖能耗。结合部队的实际条件,拟定严寒地区营房的建议方案及节能目标,并作了一定的经济性分析。结果表明,采用的节能方案基本满足节能标准的要求且经济性较好。